Compare materials and Contruction details across all four levels
Choosing the right closet system starts with understanding the differences. Use this comparison guide to explore materials, finishes, and construction features across all four levels—Regular-Tech (Level 1), Extra-Tech (Level 2), Ultra-Tech (Level 3), and Ultra-Tech Plus (Level 4). Whether you're looking for a budget-conscious solution or premium luxury, this side-by-side breakdown helps you make an informed decision tailored to your space, needs, and lifestyle in Toronto.
Regular-Tech (Level 1) vs Extra-Tech (Level 2)
|
Regular-Tech (Level 1) vs Extra-Tech (Level 2) |
||
|---|---|---|
|
Price |
25% lower price |
- |
|
Value |
- |
Greater value |
|
Br sh |
- |
Bridging shelves |
|
Board |
5/8" solid, particleboard (Brand: Panolam) Max. width - 25” |
3/4" solid, particleboard with melamine topcoat (Brands:Tafisa or Uniboard). Max. width - 35” |
|
H Bracket |
Regular hanging brackets |
Higher level hanging brackets, also equipped with cover caps |
|
H Rail |
Regular hanging rail |
Extra strong hanging rail with cover cap |
|
H Rods |
¾”Ø Hanging, steel rods, gloss chromed |
1.25” Hanging, oval, steel rods, removable, gloss chromed |
|
Cams |
Regular cams |
Smaller, in-set cams with cover cups |
|
Dr box |
Drawer box is constructed with four sides and a front face, 5/8” board |
Drawer box is constructed with four sides and a front face, 3/4” board |
|
Dr box |
Drawer box is constructed using nails and glue |
Drawer box is constructed using nails and screws |
|
Dr bottom |
Drawer bottom is constructed using four grooves and glue |
Drawer bottom is constructed using two grooves and screws |
|
Dr Runners |
Drawer roller slide (Impekk) – bottom mounted, self-close, up to 15kg (33lb). |
The Same |
Extra-Tech (Level 2) vs Ultra-Tech (Level 3)
| Extra-Tech (Level 2) vs Ultra-Tech (Level 3) | ||
|---|---|---|
|
Price |
Up to 35% lower price, same value |
- |
|
Tech |
Wall-mounted at approximately 7” above the floor, facilitating easier and more convenient cleaning |
Floor-mounted |
|
Floor |
Floor can be changed |
Closet must be removed to change the floor |
|
Install |
3 X Faster installation |
- |
|
Dust |
No cutting, no dust |
Minimal dust |
|
Depth |
Maximum depth is 16 inches |
Depth can be customized as needed |
|
Visual |
Vertical panels are always positioned at the corners of a closet |
Due to scribing technology, vertical panels are not typically placed in the corners. |
|
Fillers |
Corner panels are installed without the use of fillers |
Corner panels are installed using custom scribed fillers |
|
Visual |
- |
More visually appealing |
| Board |
3/4" solid, particleboard with melamine topcoat (Brands: Tafisa or Uniboard). Max. width - 35” |
The Same |
|
H Rods |
1.25” Hanging oval, steel rods,remo-vable, gloss chromed |
1ӯ rods, fixed, gloss chromed |
| Cams |
Smaller, in-set cams with cover cups |
The Same |
|
Holes |
Pre-drilled holes for adjustable shelves are positioned from top to bottom |
Custom pre-drilled holes for adjustable shelves |
|
Adj Pins |
Adj. Shelves’ pins – flat with “stop” |
Adj. Shelves’ pins - higher level |
|
Cap Sh |
Top shelves installed between vertical panels |
Single cap shelve installed above vertical panels |
| Hidden |
- |
Hidden storage (about 1.5 cubic feet), with secret door |
| Dr box |
Drawer box is constructed with four sides and a front face, 3/4” board |
The Same |
|
Dr Box |
Drawer box is constructed using nails and screws |
The Same |
|
Dr Bottom |
Drawer bottom is constructed using two grooves and screws |
The Same |
|
Dr Runners |
Drawer roller slide (Impekk) – bottom mounted, self-close, up to 15kg (33lb). |
The Same |
Ultra-Tech (Level 3) vs Ultra-Tech Plus (Level 4)
| Ultra-Tech (Level 3) vs Ultra-Tech Plus (Level 4) | ||
|---|---|---|
|
Price |
35% lower price, greater value |
- |
|
Tech |
Floor-mounted |
The Same |
|
Visual |
Due to scribing technology, vertical panels are typically omitted from the corners of the closet |
The Same |
|
Visual |
- |
More visually appealing |
|
Board |
3/4" solid, particleboard with melamine topcoat (Brands: Tafisa or Uniboard). Max. width - 35” |
3/4" solid, white melamine (TAFIPAN EVOLO from Tafisa). Max. width - 35” |
|
H Rods |
1ӯ steel rods, fixed, gloss chromed |
1.25” Ø aluminum deco rods |
|
Cams |
Smaller in-set cams equipped with cover cups |
The Same |
|
Holes |
Custom holes for adj. shelves |
Custom 3 group holes for adj. shelves |
|
Holes |
- |
Comes with hole covers for adjustable holes |
|
Adj Pins |
Adj. Shelves’ pins – flat with stop or Euro decorative pins |
Decorative Adj. Shelves’ pins – in-set to cams |
|
Adj Sh |
Adj. Shelves edge banded on the facing side. | Adj. Shelves edge banded around the perimeter. |
| Adj Sh |
Same depth as vertical panels |
¼” less then vertical panels |
|
Cap Sh |
Single cap shelve positioned above vertical panels |
The Same |
| Hidden |
Hidden storage (about 1.5 cubic feet), with secret door |
The Same |
| Dr box | Drawer box constructed using four sides and face, ¾ boards | The Same |
|
Dr Box |
Drawer box constructed using nails and screws |
The Same |
|
Dr Bottom |
Drawer bottom constructed using two grooves and screws |
Drawer bottom constructed without grooves and screwed around the perimeter with screws |
| Dr Bottom |
Drawer bottom – 1/8” Fibrex board |
Drawer bottom - ¾” solid particle board with melamine top coat |
|
Dr Runners |
Drawer runners (Berenson) – top and side mounted, soft-close, ball bearing, full extension, telescopic, smooth and quite, up to 88 kg (190lb) |
The Same |
|
Dr Bumpers |
Drawer bumpers – peel and stick | Drawer bumpers installed by drilling holes and setting them in place |
